:: MG ZR forum - View Single Post - Start and cut immediately
View Single Post
Old 26-02-2019, 19:18   #10 (permalink)
*Newbie* Handle with care

Posts: 12
Join Date: Nov 2018
iTrader: 0 (0%)
Thanks: 0
Thanked 0 Times in 0 Posts
ludo.190 is on a distinguished road
i have find this:

"***8226; Immobiliser State : Shows the current state of MEMS3 immobilisation. If the value shows OK the ECU has received at least one correct security code since the ignition was switched on otherwise there has been no signal transmitted between the Immobiliser ECU and MEMS3 or the signal did not contain the correct code. If the value shows IMMOBILISED the engine will start and fire once for about 1 second and then stop as the fuel injections are inhibited. If the ignition is switched off for approx. 20 seconds this sequence will repeat. "
ludo.190 is offline   Reply With Quote