MG ZR Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4,355 Posts
Ah balls, the one I removed the stud from didn't have the reluctor ring on for the ABS.

That reluctor ring can be removed with WD40 and a chisel but don't damage the stepped face and take it slowly working around the circumference as they are liable to shatter.

Sorry about that TJ. I didn't even think about ABS.

If your still struggling shout me
 

·
Premium Member
Joined
·
28,417 Posts
Discussion Starter · #3 ·
Ah balls, the one I removed the stud from didn't have the reluctor ring on for the ABS.

That reluctor ring can be removed with WD40 and a chisel but don't damage the stepped face and take it slowly working around the circumference as they are liable to shatter.

Sorry about that TJ. I didn't even think about ABS.

If your still struggling shout me
Thanks mate, I've spoken to Andy25 who's going to sort it for me using the proper tools as he's coming up here for Lisa's birthday next week anyway, so I'll just fire it all back together until then.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top