MG ZR Forums banner
1 - 3 of 3 Posts

·
^buy meeeeeeeee^
Joined
·
1,407 Posts
Discussion Starter · #1 ·
Needing a new one.

ill keep this short ...

1. How much should i be paying for standard item

2. Any recommendations on an aftermarket clutch that wont compromise too much driving comfort. or would this even be worth getting

3. Anything that i should think about having done at the same time to save labour efforts

cheaaaaaaaaars
 

·
Registered
Joined
·
3,147 Posts
Well

1. I think it was around £60
http://cgi.ebay.co.uk/ROVER-25-45-M...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14

Ebay wise but from the garage, call it £80

2. I only know of the AP uprated fast road clutch but i bet theres more of them. Never tryed it but I will have a smaller biting point but will last so much long and be much more responsive. Around : £165

3. Probally should get a uprated lightend flywheel while you doing your clutch if you want to. If you wanna go extreme get a racing flyline ( ultra light and extremly fast spool up ) Around £200 or look at ( what i recomend ) getting the orignal flywheel skimmed. ( cheaper and will make a difference ) we had our subaru flywheel skimmed and that was £55
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top