[dingodoo]

I am going to replace both discs on front of my car but are they the right ones?
Link #1
Eicher Premium
Link #2
Eicher Premium Front 262mm Vented Brake Disc - Rover 200, 400, Honda Civic | eBay

I ask this as some listed online are 239mm width and others are 269mm

Will I need to buy anything else like screws or will the current ones be ok?

My car is a 2003, MGZR, 1396, 105 Petrol

 

[Man in the Car]

The standard factory fit front brakes on the 1.4 engined 25/ZR would have 262mm solid discs.

However, a good many owners have in the past upgraded to either the 262mm vented set-up from the ZR 120 (which require a different caliper from the solid discs), or more commonly to the 282mm vented discs and calipers from the ZR160/ZS180.

If you are unsure, I would suggest having a wheel off and measuring the diameter of your current discs and checking to see if they are solid or vented before ordering any new ones.

The 239mm discs you have seen are for the rear of the ZR/ZS 120/115, and the 269mm ones are for the rear of the ZR160/ZS180.

 

[dingodoo]

so are these ok?
Link #1
Eicher Premium
Link #2
Eicher Premium Front 262mm Solid Brake Disc - Rover 25, 45 200, 400 Series & MG

If these are ok do i need to buy additional screwes to replace the old ones?

ps.
everything on my car is standard factory fitted